Richard Petty once told AutoNetTV, “You’ve gotta have good brakes. If you’ve got good brakes you can keep yourself out of a lotta trouble.”
That’s why a regular brake inspection is on every Arizona vehicle’s maintenance schedule. An inspection at Martin’s Auto Repair will check your brake system and let you know if there are any problems.
Here are some symptoms to watch for:
- Low or spongy brake pedal
- Hard brake pedal
- A brake warning light that stays on
- Constantly squealing or grinding brakes
- Vibrations or clunking sounds when you apply your brakes
If you are experiencing any of these, it’s time to get your brakes checked.
There are two types of brakes: disc and drum. Disc brakes have a rotor that’s attached to the axle. Calipers straddle the rotor, kind of like the brakes on a bicycle.
Drum brakes are more common on back wheels. Both types have pads or shoes that press against the brakes and slow the vehicle. Brake pads and shoes are made out of very tough material to withstand the heat and force generated when stopping your car.
If the brake pads wear away completely, you can damage the rotors. The calipers can grind grooves in the rotor. Then the rotor must either be resurfaced or replaced. That’s not only expensive, but also dangerous because your vehicle won’t stop as quickly. Sometimes rotors warp or crack and must be replaced.
Brake service will also include a check of your brake fluid. Not enough fluid means not enough pressure to brake properly. Also, water builds up in the brake fluid over time, which leads to corrosion, leaks and brake damage. You should change the brake fluid when your manufacturer recommends to avoid these problems.
So, be sure to properly maintain your brakes, because it’s a lot cheaper than paying the body shop after an accident.